Share via


Filters

Media Services logo v3


Warning

Azure Media Services will be retired June 30th, 2024. For more information, see the AMS Retirement Guide.

When delivering your content to customers (Live Streaming events or Video on Demand) your client might need more flexibility than what's described in the default asset's manifest file. Azure Media Services offers Dynamic Manifests based on pre-defined filters.

Filters are server-side rules that allow your customers to do things like:

  • Play back only a section of a video (instead of playing the whole video). For example:
    • Reduce the manifest to show a sub-clip of a live event ("sub-clip filtering"), or
    • Trim the start of a video ("trimming a video").
  • Deliver only the specified renditions and/or specified language tracks that are supported by the device that is used to play back the content ("rendition filtering").
  • Adjust Presentation Window (DVR) in order to provide a limited length of the DVR window in the player ("adjusting presentation window").

Media Services enables you to create Account filters and Asset filters for your content. In addition, you can associate your pre-created filters with a Streaming Locator.

Filter types

There are two types of filters:

  • Account Filters (global) - can be applied to any asset in the Azure Media Services account, have a lifetime of the account.
  • Asset Filters (local) - can only be applied to an asset with which the filter was associated upon creation, have a lifetime of the asset.

Account Filters and Asset Filters types have exactly the same properties for defining/describing the filter. Except when creating the Asset Filter, you need to specify the asset name with which you want to associate the filter.

Depending on your scenario, you decide what type of a filter is more suitable (Asset Filter or Account Filter). Account Filters are suitable for device profiles (rendition filtering) where Asset Filters could be used to trim a specific asset.

You use the following properties to describe the filters.

Name Description
firstQuality The first quality bitrate of the filter.
presentationTimeRange The presentation time range of a live event manifest. This property is used for filtering manifest start/end points, presentation window length, and the live start position.
For more information, see PresentationTimeRange.
tracks The tracks selection conditions. For more information, see tracks

presentationTimeRange

Use this property with Asset Filters. It isn't recommended to set the property with Account Filters.

Name Description
startTimestamp Applies to Video on Demand (VoD) or Live Streaming.
This is a long value that represents an absolute start point of the stream. The value gets rounded to the closest next GOP start. The unit is the timescale, so a startTimestamp of 150000000 would be for 15 seconds.
Use startTimestamp and endTimestamp to trim the fragments that will be in the playlist (manifest).
For example, startTimestamp=40000000 and endTimestamp=100000000 using the default timescale will generate a playlist that contains fragments from between 4 seconds and 10 seconds of the VoD presentation. If a fragment straddles the boundary, the entire fragment will be included in the manifest.
endTimestamp Applies to Video on Demand (VoD).
For the Live Streaming presentation, it is silently ignored and applied when the presentation ends and the stream becomes VoD.
This is a long value that represents an absolute end point of the presentation, rounded to the closest next GOP start. The unit is the timescale, so an endTimestamp of 1800000000 would be for 3 minutes.
Use startTimestamp and endTimestamp to trim the fragments that will be in the playlist (manifest).
For example, startTimestamp=40000000 and endTimestamp=100000000 using the default timescale will generate a playlist that contains fragments from between 4 seconds and 10 seconds of the VoD presentation. If a fragment straddles the boundary, the entire fragment will be included in the manifest.
timescale Applies to all timestamps and durations in a Presentation Time Range, specified as the number of increments in one second.
Default is 10000000 - ten million increments in one second, where each increment would be 100 nanoseconds long. However, the value may differ depending on the source of the video or if you are using a live event with encoding in the cloud (defaults to 90Khz, or 90000 for video.)
For example, if you want to set a startTimestamp at 30 seconds, you would use a value of 300000000 when using the default timescale. Be certain to check the manifest for your asset to confirm that the timescale for the video track is in the scale that you set. When using live events with encoding, the timescale can be in 90Khz (90000) for the video tracks and 48khz (48000) for the audio tracks.
liveBackoffDuration Applies to Live Streaming only.
This value defines the latest live position that a client can seek to.
Using this property, you can delay live playback position and create a server-side buffer for players.
The unit for this property is timescale (see below).
The maximum live back off duration is 300 seconds (3000000000).
For example, a value of 2000000000 means that the latest available content is 20 seconds delayed from the real live edge.
presentationWindowDuration Applies to Live Streaming only.
Use presentationWindowDuration to apply a sliding window of fragments to include in a playlist.
The unit for this property is timescale (see below).
For example, set presentationWindowDuration=1200000000 to apply a two-minute sliding window. Media within 2 minutes of the live edge will be included in the playlist. If a fragment straddles the boundary, the entire fragment will be included in the playlist. The minimum presentation window duration is 60 seconds.
forceEndTimestamp Applies to Live Streaming only.
Indicates whether the endTimestamp property must be present. If true, endTimestamp must be specified or a bad request code is returned.
Allowed values: false, true.

Tracks

You specify a list of filter track property conditions (FilterTrackPropertyConditions) based on which the tracks of your stream (Live Streaming or Video on Demand) should be included into dynamically created manifest. The filters are combined using a logical AND and OR operation.

Filter track property conditions describe track types, values (described in the following table), and operations (Equal, NotEqual).

Name Description
Bitrate Use the bitrate of the track for filtering.

The best value is a range of bitrates, in bits per second. For example, "0-2427000".

Note: while you can use a specific bitrate value, like 250000 (bits per second), this approach isn't recommended, as the exact bitrates can fluctuate from one Asset to another.
FourCC Use the FourCC value of the track for filtering.

The value is the first element of codecs format, as specified in RFC 6381. Currently, the following codecs are supported:
For Video: "avc1", "hev1", "hvc1"
For Audio: "mp4a", "ec-3"

To determine the FourCC values for tracks in an Asset, get and examine the manifest file.
Language Use the language of the track for filtering.

The value is the tag of a language you want to include, as specified in RFC 5646. For example, "en".
Name Use the name of the track for filtering.
Type Use the type of the track for filtering.

The following values are allowed: "video", "audio", or "text".

Example

The following example defines a Live Streaming filter:

{
  "properties": {
    "presentationTimeRange": {
      "startTimestamp": 0,
      "endTimestamp": 170000000,
      "presentationWindowDuration": 9223372036854776000,
      "liveBackoffDuration": 0,
      "timescale": 10000000,
      "forceEndTimestamp": false
    },
    "firstQuality": {
      "bitrate": 128000
    },
    "tracks": [
      {
        "trackSelections": [
          {
            "property": "Type",
            "operation": "Equal",
            "value": "Audio"
          },
          {
            "property": "Language",
            "operation": "NotEqual",
            "value": "en"
          },
          {
            "property": "FourCC",
            "operation": "NotEqual",
            "value": "EC-3"
          }
        ]
      },
      {
        "trackSelections": [
          {
            "property": "Type",
            "operation": "Equal",
            "value": "Video"
          },
          {
            "property": "Bitrate",
            "operation": "Equal",
            "value": "3000000-5000000"
          }
        ]
      }
    ]
  }
}

Filter your HLS or DASH manifests on creation of Streaming Locator

Media Services allows you to create a Streaming Locator that is pre-filtered by passing in a collection of filters in the filter property on the streaming locator entity. This allows you to pre-filter all manifests on the streaming locator. The original manifest is no longer available through this streaming locator, and only the filtered response will be accessible to clients requesting the URLs for DASH or HLS from the filtered streaming locator. This is helpful in situations where you want to only publish a portion of an asset, and prevent users from gaining access to the full original manifest for the asset by manipulating the query string of the HLS or DASH manifest URL.

You can specify a list of asset or account filters on your Streaming Locator. The Dynamic Packager applies this list of filters together with those your client specifies in the URL. This combination generates a Dynamic Manifest, which is based on filters in the URL + filters you specify on the Streaming Locator.

Updating filters

Filters and streaming locators can be updated on the fly, but keep in mind that it can take up to 10 seconds for any updates to update on the front-end web servers, and there can be issues with downstream CDN caching of the content if you are updating the same Streaming Locator that has been published and used in production already.

It isn't recommended to update the definition of filters associated with an actively published Streaming Locator, especially when CDN is enabled. Streaming servers and CDNs can have internal caches that may result in stale cached data to be returned.

If the filter definition needs to be changed consider creating a new filter and adding it to the Streaming Locator URL or publishing a uniquely new Streaming Locator that references the updated filter directly.

Get help and support

You can contact Media Services with questions or follow our updates by one of the following methods: