Device provisioning: A manufacturing timeline for TPM devices

在 十一月 8, 2017 上貼文

Senior Program Manager, Azure IoT

A lot of folks using the IoT Hub Device Provisioning Service are starting to use hardware security modules (HSMs) in their devices because of how easy it is to use an HSM with the provisioning service. This is great, and the team loves hearing about customers increasing the security of their solutions. However, since a lot of customers are new to HSMs, particularly Trusted Platform Modules (TPMs), we've received a couple of questions about how TPMs specifically fit into the existing manufacturing process. This blog post should help clarify things.

This article is only relevant for devices using TPM 2.0 with HMAC key support and their endorsement keys and not for devices using X.509 certificates for authentication. Check out this blog post to learn more about secure hardware with the Device Provisioning Service using X.509 certificates. TPM is an industry-wide, ISO standard from the Trusted Computing Group, and you can read more about TPM at the complete TPM 2.0 spec or the ISO/IEC 11889 spec.

At some point in the manufacturing process, you have to extract the endorsement key (EK) from the device and take ownership of the TPM so there's an owner key available to the device. The EK extraction and ownership claim can occur at different times in the manufacturing process, which is great because it provides a lot of flexibility for customers! However, a lot of folks are taking this opportunity to increase the security of their IoT devices by using an HSM (yay!), and so the TPM lifecycle is new to them (especially since a lot of the manufacturing process might still be in the design phase at this point). This post provides general guidance around when to extract the EK and when to claim ownership of the TPM so the owner key is produced.

A couple of notes on software TPMs:

  • I'm assuming you're using a discrete, firmware, or integrated TPM, and I’ve included notes on using a software, or non-discrete, TPM where applicable. If you're using a software TPM, there may be additional steps that I don't call out. That's because software TPMs can have different implementations and I can't cover them all, but you should be able to figure out how it works for your particular software TPM based on the timeline below.
  • Software emulated TPMs are well-suited for prototyping or testing, but they do not provide the same level of security as discrete, firmware, or integrated TPMs do. Please don’t use software TPMs in production. Learn more about the types of TPMs.

The following is a general timeline of how the TPM goes through the production process and ends up in a device; each manufacturing process is a little different and this post only talks about the most common patterns. If you're new to manufacturing devices using a TPM, the below serves as guidance about when to do certain things with the keys. If you have been manufacturing devices using TPMs for a while, feel free to disregard if your current process is working well for you.

Step 1: TPM is manufactured

  • If you are purchasing TPMs from a TPM manufacturer for use in your devices, see if they will extract the EK_pubs for you and provide you the list of EK_pubs in addition to the physical shipment. You may also give the TPM manufacturer write access to your enrollment list via the provisioning service’s shared access policies and let them add the TPMs to your enrollment list for you, but this might be a little early in the production process and requires a certain amount of trust in the TPM manufacturer. Do so at your own risk.
  • If you are manufacturing TPMs to sell to device manufacturers, consider providing your customers with a list of EK_pubs with their physical TPMs to save them a step.
  • If you are manufacturing TPMs to use with your own devices, identify where in the manufacturing process is the most convenient to extract the EK_pub. This could occur at any of the later steps presented, and I trust you to understand your manufacturing process and when this could happen.

Step 2: TPM is installed into a device

At this point in the production process, you should know which Device Provisioning Service the device should talk to, and you can add devices to the enrollment list for automated provisioning. Learn more about automatic device provisioning with the Device Provisioning Service in documentation.

  • If you haven't already, this may be a time to extract the EK_pub.
  • Depending on the installation process, you can take ownership of the TPM at this time.

Step 3: Device has firmware and software installed

This is when the Device Provisioning Service client is installed with the ID scope and global URL for provisioning.

  • This is the last chance to extract the EK_pub. If a third party is installing the software on your device, you probably want to have already extracted the EK_pub.
  • This is when you want to take ownership of the TPM, because you're running things on the device anyway.
  • Software TPM note: this may be when the software TPM is installed as well. You should extract the EK_pub at the time the software TPM is installed.

Step 4: Device is boxed-up and sent to the warehouse, awaiting final installation

The device might sit in a warehouse for 6-12 months before it is deployed in the field.

Step 5: Device is installed into the location

Once the device arrives at its final location, it goes through automated provisioning with the Device Provisioning Service.

Of course, every manufacturing process has its own unique characteristics and the above timeline may not exactly match your process. Use your best judgment, and contact Microsoft Support if you're having trouble.

Learn more about the TPM attestation in the Device Provisioning Service in this blog post.

To sum things up with a limerick:

For all those who use TPMs
And have questions about the whens
To take ownership
Of the safety chip
In essence, it all just depends