跳过导航

Azure 快速入门模板目前提供英文版

Update a packet core control plane

Tom Zhu 提供
上次更新时间: 2022/7/28

This template allows you to update the version of an existing packet core.

此 Azure Resource Manager (ARM) 模板由社区的某个成员(而不是由 Microsoft)创建。每个 ARM 模板都根据其所有者(不是 Microsoft)的许可协议向你授予许可。Microsoft 不对由社区成员提供并授予许可的 ARM 模板负责,并且不针对安全性、兼容性和性能进行筛选。社区 ARM 模板不由任何 Microsoft 支持计划或服务提供支持,按“原样”提供,没有任何种类的担保。

参数

参数名 说明
location Region where the mobile network will be deployed (must match the resource group region)
existingSiteName The name of the existing packet core / site.
existingPacketCorePlatformType The name of the existing packet core platform type.
existingMobileNetworkName The name of the mobile network.
existingPacketCoreNetworkTechnology The mode in which the packet core instance will run.
existingPacketCoreCustomLocationId The resource ID of the customLocation representing the ASE device where the packet core will be deployed. If this parameter is not specified then the 5G core will be created but will not be deployed to an ASE. [Collect custom location information](https://docs.microsoft.com/en-gb/azure/private-5g-core/collect-required-information-for-a-site#collect-custom-location-information) explains which value to specify here.
controlPlaneAccessInterfaceName The name of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface. This should match one of the interfaces configured on your Azure Stack Edge machine.
controlPlaneAccessIpAddress The IP address of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface.
accessSubnet The network address of the access subnet in CIDR notation
accessGateway The access subnet default gateway
newVersion The version of packet core to use. Only set this field when instructed to by your support engineer.

使用模板

PowerShell

New-AzResourceGroup -Name <resource-group-name> -Location <resource-group-location> #use this command when you need to create a new resource group for your deployment
New-AzResourceGroupDeployment -ResourceGroupName <resource-group-name> -TemplateUri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-update-packet-core-control-plane/azuredeploy.json
安装和配置 Azure PowerShell

命令行

az group create --name <resource-group-name> --location <resource-group-location> #use this command when you need to create a new resource group for your deployment
az group deployment create --resource-group <my-resource-group> --template-uri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-update-packet-core-control-plane/azuredeploy.json
安装和配置 Azure 跨平台命令行界面