탐색 건너뛰기

Azure 빠른 시작 템플릿은 현재 영어로 제공됩니다.

Creates Virtual WAN resources

게시자: Arpan-MSFT
마지막 업데이트: 2021-11-29

This template allows you to create virtual WAN resources including Virtual WAN, Virtual Hub, VPN Gateway, VPN Site and a VPN Connecton.

이 Azure Resource Manager 템플릿은 Microsoft가 아니라 커뮤니티 구성원에 의해 만들어졌습니다. 각 Resource Manager 템플릿은 Microsoft가 아닌 해당 소유자의 사용권 계약에 의거하여 사용이 허가됩니다. Microsoft는 커뮤니티 구성원에 의해 제공 및 라이선스가 부여된 Resource Manager 템플릿에 대해 책임이 없으며, 보안, 호환성 또는 성능을 검사하지 않습니다. 커뮤니티 Resource Manager 템플릿은 Microsoft 지원 프로그램 또는 서비스에서 지원되지 않고, 어떠한 보증도 없이 있는 그대로 제공됩니다.

매개 변수

매개 변수 이름 설명
location Location where all resources will be created.
vWanName Name of the Virtual Wan.
vWanSku Sku of the Virtual Wan.
hubName Name of the Virtual Hub. A virtual hub is created inside a virtual wan.
vpnGatewayName Name of the VPN Gateway. A VPN Gateway is created inside a virtual hub.
vpnSiteName Name of the vpnsite. A vpnsite represents the on-premise vpn device. A public ip address is mandatory for a VPN Site creation.
connectionName Name of the vpnconnection. A vpn connection is established between a vpnsite and a VPN Gateway.
vpnSiteAddressspaceList A list of static routes corresponding to the VPN Gateway. These are configured on the VPN Gateway. Mandatory if BGP is disabled.
vpnSitePublicIPAddress The public IP address of a VPN Site.
vpnSiteBgpAsn The BGP ASN number of a VPN Site. Unused if BGP is disabled.
vpnSiteBgpPeeringAddress The BGP peer IP address of a VPN Site. Unused if BGP is disabled.
hubAddressPrefix The hub address prefix. This address prefix will be used as the address prefix for the hub vnet
enableBgp This needs to be set to true if BGP needs to enabled on the VPN connection.

템플릿 사용

PowerShell

New-AzResourceGroup -Name <resource-group-name> -Location <resource-group-location> #use this command when you need to create a new resource group for your deployment
New-AzResourceGroupDeployment -ResourceGroupName <resource-group-name> -TemplateUri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.network/virtual-wan/azuredeploy.json
Azure PowerShell 설치 및 구성

명령줄

az group create --name <resource-group-name> --location <resource-group-location> #use this command when you need to create a new resource group for your deployment
az group deployment create --resource-group <my-resource-group> --template-uri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.network/virtual-wan/azuredeploy.json
Azure 크로스 플랫폼 명령줄 인터페이스 설치 및 구성