The Azure Quickstart templates are currently available in English
This template allows you to create a Point-to-Site connection using VirtualNetworkGateways
이 Azure Resource Manager 템플릿은 Microsoft가 아니라 커뮤니티 구성원에 의해 만들어졌습니다. 각 Resource Manager 템플릿은 Microsoft가 아닌 해당 소유자의 사용권 계약에 의거하여 사용이 허가됩니다. Microsoft는 커뮤니티 구성원에 의해 제공 및 라이선스가 부여된 Resource Manager 템플릿에 대해 책임이 없으며, 보안, 호환성 또는 성능을 검사하지 않습니다. 커뮤니티 Resource Manager 템플릿은 Microsoft 지원 프로그램 또는 서비스에서 지원되지 않고, 어떠한 보증도 없이 있는 그대로 제공됩니다.
매개 변수
| 매개 변수 이름 | 설명 |
|---|---|
| virtualNetworkName | Name of the VNet. |
| vnetAddressPrefix | Address space for the VNet. |
| gatewaySubnetPrefix | The prefix for the GatewaySubnet where the VirtualNetworkGateway will be deployed. This must be at least /29. |
| gatewayPublicIPName | The name of the PublicIP attached to the VirtualNetworkGateway. |
| gatewayName | The name of the VirtualNetworkGateway. |
| gatewaySku | The Sku of the Gateway. This must be one of Basic, Standard or HighPerformance. |
| vpnClientAddressPoolPrefix | The IP address range from which VPN clients will receive an IP address when connected. Range specified must not overlap with on-premise network. |
| clientRootCertName | The name of the client root certificate used to authenticate VPN clients. This is a common name used to identify the root cert. |
| clientRootCertData | Client root certificate data used to authenticate VPN clients. |
| revokedCertName | The name of revoked certificate, if any. This is a common name used to identify a given revoked certificate. |
| revokedCertThumbprint | Thumbprint of the revoked certificate. This would revoke VPN client certificates matching this thumbprint from connecting to the VNet. |
| location | Location for all resources. |
템플릿 사용
PowerShell
New-AzResourceGroup -Name <resource-group-name> -Location <resource-group-location> #use this command when you need to create a new resource group for your deploymentAzure PowerShell 설치 및 구성
New-AzResourceGroupDeployment -ResourceGroupName <resource-group-name> -TemplateUri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.network/point-to-site/azuredeploy.json
명령줄
az group create --name <resource-group-name> --location <resource-group-location> #use this command when you need to create a new resource group for your deploymentAzure 크로스 플랫폼 명령줄 인터페이스 설치 및 구성
az group deployment create --resource-group <my-resource-group> --template-uri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.network/point-to-site/azuredeploy.json