Azure 빠른 시작 템플릿은 현재 영어로 제공됩니다.
This template allows you to update the version of an existing packet core.
이 Azure Resource Manager 템플릿은 Microsoft가 아니라 커뮤니티 구성원에 의해 만들어졌습니다. 각 Resource Manager 템플릿은 Microsoft가 아닌 해당 소유자의 사용권 계약에 의거하여 사용이 허가됩니다. Microsoft는 커뮤니티 구성원에 의해 제공 및 라이선스가 부여된 Resource Manager 템플릿에 대해 책임이 없으며, 보안, 호환성 또는 성능을 검사하지 않습니다. 커뮤니티 Resource Manager 템플릿은 Microsoft 지원 프로그램 또는 서비스에서 지원되지 않고, 어떠한 보증도 없이 있는 그대로 제공됩니다.
매개 변수
| 매개 변수 이름 | 설명 |
|---|---|
| location | Region where the mobile network will be deployed (must match the resource group region) |
| existingSiteName | The name of the existing packet core / site. |
| existingPacketCorePlatformType | The name of the existing packet core platform type. |
| existingMobileNetworkName | The name of the mobile network. |
| existingPacketCoreNetworkTechnology | The mode in which the packet core instance will run. |
| existingPacketCoreCustomLocationId | The resource ID of the customLocation representing the ASE device where the packet core will be deployed. If this parameter is not specified then the 5G core will be created but will not be deployed to an ASE. [Collect custom location information](https://docs.microsoft.com/en-gb/azure/private-5g-core/collect-required-information-for-a-site#collect-custom-location-information) explains which value to specify here. |
| controlPlaneAccessInterfaceName | The name of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface. This should match one of the interfaces configured on your Azure Stack Edge machine. |
| controlPlaneAccessIpAddress | The IP address of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface. |
| accessSubnet | The network address of the access subnet in CIDR notation |
| accessGateway | The access subnet default gateway |
| newVersion | The version of packet core to use. Only set this field when instructed to by your support engineer. |
템플릿 사용
PowerShell
New-AzResourceGroup -Name <resource-group-name> -Location <resource-group-location> #use this command when you need to create a new resource group for your deploymentAzure PowerShell 설치 및 구성
New-AzResourceGroupDeployment -ResourceGroupName <resource-group-name> -TemplateUri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-update-packet-core-control-plane/azuredeploy.json
명령줄
az group create --name <resource-group-name> --location <resource-group-location> #use this command when you need to create a new resource group for your deploymentAzure 크로스 플랫폼 명령줄 인터페이스 설치 및 구성
az group deployment create --resource-group <my-resource-group> --template-uri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-update-packet-core-control-plane/azuredeploy.json