탐색 건너뛰기

Azure 빠른 시작 템플릿은 현재 영어로 제공됩니다.

Create a full 5G Core deployment

게시자: rainbowFi
마지막 업데이트: 2022-03-10

This template creates all resources required to deploy a Private 5G Core, including provisioning sims and creating sample QoS policy. It can optionally be deployed to a Kubernetes cluster running on an Azure Stack Edge device.

이 Azure Resource Manager 템플릿은 Microsoft가 아니라 커뮤니티 구성원에 의해 만들어졌습니다. 각 Resource Manager 템플릿은 Microsoft가 아닌 해당 소유자의 사용권 계약에 의거하여 사용이 허가됩니다. Microsoft는 커뮤니티 구성원에 의해 제공 및 라이선스가 부여된 Resource Manager 템플릿에 대해 책임이 없으며, 보안, 호환성 또는 성능을 검사하지 않습니다. 커뮤니티 Resource Manager 템플릿은 Microsoft 지원 프로그램 또는 서비스에서 지원되지 않고, 어떠한 보증도 없이 있는 그대로 제공됩니다.

매개 변수

매개 변수 이름 설명
location Region where the Mobile Network will be deployed (must match the resource group region)
mobileNetworkName The name for the private mobile network
mobileCountryCode The mobile country code for the private mobile network
mobileNetworkCode The mobile network code for the private mobile network
siteName The name for the site
serviceName The name of the service
simResources An array containing properties of the SIM(s) you wish to create
simPolicyName The name of the SIM policy
sliceName The name of the slice
controlPlaneAccessInterfaceName The name of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface. This should match one of the interfaces configured on your Azure Stack Edge machine.
controlPlaneAccessIpAddress The IP address of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface.
userPlaneAccessInterfaceName The logical name of the user plane interface on the access network. In 5G networks this is called the N3 interface whereas in 4G networks this is called the S1-U interface. This should match one of the interfaces configured on your Azure Stack Edge machine.
userPlaneAccessInterfaceIpAddress The IP address of the user plane interface on the access network. In 5G networks this is called the N3 interface whereas in 4G networks this is called the S1-U interface.
accessSubnet The network address of the access subnet in CIDR notation
accessGateway The access subnet default gateway
userPlaneDataInterfaceName The logical name of the user plane interface on the data network. In 5G networks this is called the N6 interface whereas in 4G networks this is called the SGi interface. This should match one of the interfaces configured on your Azure Stack Edge machine.
userPlaneDataInterfaceIpAddress The IP address of the user plane interface on the data network. In 5G networks this is called the N6 interface whereas in 4G networks this is called the SGi interface.
userPlaneDataInterfaceSubnet The network address of the data subnet in CIDR notation
userPlaneDataInterfaceGateway The data subnet default gateway
userEquipmentAddressPoolPrefix The network address of the subnet from which dynamic IP addresses must be allocated to UEs, given in CIDR notation. Optional if userEquipmentStaticAddressPoolPrefix is specified. If both are specified, they must be the same size and not overlap.
userEquipmentStaticAddressPoolPrefix The network address of the subnet from which static IP addresses must be allocated to UEs, given in CIDR notation. Optional if userEquipmentAddressPoolPrefix is specified. If both are specified, they must be the same size and not overlap.
dataNetworkName The name of the data network
coreNetworkTechnology The mode in which the packet core instance will run
naptEnabled Whether or not Network Address and Port Translation (NAPT) should be enabled for this data network
customLocation The resource ID of the customLocation representing the ASE device where the packet core will be deployed. If this parameter is not specified then the 5G core will be created but will not be deployed to an ASE. [Collect custom location information](https://docs.microsoft.com/en-gb/azure/private-5g-core/collect-required-information-for-a-site#collect-custom-location-information) explains which value to specify here.

템플릿 사용

PowerShell

New-AzResourceGroup -Name <resource-group-name> -Location <resource-group-location> #use this command when you need to create a new resource group for your deployment
New-AzResourceGroupDeployment -ResourceGroupName <resource-group-name> -TemplateUri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-create-full-5gc-deployment/azuredeploy.json
Azure PowerShell 설치 및 구성

명령줄

az group create --name <resource-group-name> --location <resource-group-location> #use this command when you need to create a new resource group for your deployment
az group deployment create --resource-group <my-resource-group> --template-uri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-create-full-5gc-deployment/azuredeploy.json
Azure 크로스 플랫폼 명령줄 인터페이스 설치 및 구성