탐색 건너뛰기

Azure 빠른 시작 템플릿은 현재 영어로 제공됩니다.

Deploy Darktrace vSensors

게시자: menev-dt
마지막 업데이트: 2022-02-02

This template allows you to deploy one or more stand-alone Darktrace vSensors

이 Azure Resource Manager 템플릿은 Microsoft가 아니라 커뮤니티 구성원에 의해 만들어졌습니다. 각 Resource Manager 템플릿은 Microsoft가 아닌 해당 소유자의 사용권 계약에 의거하여 사용이 허가됩니다. Microsoft는 커뮤니티 구성원에 의해 제공 및 라이선스가 부여된 Resource Manager 템플릿에 대해 책임이 없으며, 보안, 호환성 또는 성능을 검사하지 않습니다. 커뮤니티 Resource Manager 템플릿은 Microsoft 지원 프로그램 또는 서비스에서 지원되지 않고, 어떠한 보증도 없이 있는 그대로 제공됩니다.

매개 변수

매개 변수 이름 설명
location Location for all resources. The default is the Resource Group location.
virtualNetworkResourceGroupName Name of the Virtual Network Resource Group.
virtualNetworkName Name of the Virtual Network, should be in the above Location.
subnet1Name Name of the Subnet in the Virtual Network.
networkSecurityGroupName Name for the Network Security Group that the template will create. Note that a pre-existing Network Security Group with the same name will be replaced.
MgmtSourceAddressOrRange Provide an address range using CIDR notation (e.g. 10.1.0.0/24), or an IP address (e.g. 192.168.99.21) for Management access via ssh (port 22/TCP). You can also provide a comma-separated list of IP addresses and/or address ranges (a valid comma-separated list is 10.1.0.4,10.2.1.0/24). To allow access from any IP you can use 0.0.0.0/0.
vsensorName The name of the vSensor.
numberOfVsensors Number of vSensors to be deployed, max is 4.
diskSize The vSensor disk size in GB between 30 and 1024. Check the Darktrace customer portal for more information.
virtualMachineSize The VM size. Check the Darktrace customer portal for more information about the vSensor Virtual Hardware requirements.
adminUsername Username to be created when the vSensor is spun up. Note that password authentication over ssh for newly created VMs is disabled.
adminPublicKey Public key for the adminUsername user to ssh the vSensor.
applianceHostName The FQDN or the IP of the Darktrace master instance (virtual/physical).
appliancePort Darktrace master instance connection port.
updateKey Darktrace Update Key needed to install the vSensor package. Contact your Darktrace representative for more information.
pushToken The push token that vSensor will use to connect and register on the Darktrace master instance. Should be generated on the Darktrace master instance.
osSensorHMACToken TThe osSensor HMAC Token.

템플릿 사용

PowerShell

New-AzResourceGroup -Name <resource-group-name> -Location <resource-group-location> #use this command when you need to create a new resource group for your deployment
New-AzResourceGroupDeployment -ResourceGroupName <resource-group-name> -TemplateUri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/application-workloads/darktrace-vsensor-standalone/azuredeploy.json
Azure PowerShell 설치 및 구성

명령줄

az group create --name <resource-group-name> --location <resource-group-location> #use this command when you need to create a new resource group for your deployment
az group deployment create --resource-group <my-resource-group> --template-uri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/application-workloads/darktrace-vsensor-standalone/azuredeploy.json
Azure 크로스 플랫폼 명령줄 인터페이스 설치 및 구성