Omitir navegación

Las plantillas de Inicio rápido de Azure están disponibles actualmente en inglés.

Update a packet core control plane

por Tom Zhu
Última actualización: 28/07/2022

This template allows you to update the version of an existing packet core.

Esta plantilla de Azure Resource Manager (ARM) la creó un miembro de la comunidad, no Microsoft. Su propietario (no Microsoft) le permite usar las plantillas de ARM con arreglo a un contrato de licencia. Microsoft no se responsabiliza de ninguna plantilla de ARM que le proporcionen los miembros de la comunidad (o cuya licencia le otorguen) en cuanto a su seguridad, compatibilidad ni rendimiento. Las plantillas de ARM de la comunidad no reciben ningún tipo de soporte en ningún servicio ni programa de soporte de Microsoft. Dichas plantillas se proporcionan TAL CUAL, sin garantía de ningún tipo.

Parámetros

Nombre del parámetro Descripción
location Region where the mobile network will be deployed (must match the resource group region)
existingSiteName The name of the existing packet core / site.
existingPacketCorePlatformType The name of the existing packet core platform type.
existingMobileNetworkName The name of the mobile network.
existingPacketCoreNetworkTechnology The mode in which the packet core instance will run.
existingPacketCoreCustomLocationId The resource ID of the customLocation representing the ASE device where the packet core will be deployed. If this parameter is not specified then the 5G core will be created but will not be deployed to an ASE. [Collect custom location information](https://docs.microsoft.com/en-gb/azure/private-5g-core/collect-required-information-for-a-site#collect-custom-location-information) explains which value to specify here.
controlPlaneAccessInterfaceName The name of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface. This should match one of the interfaces configured on your Azure Stack Edge machine.
controlPlaneAccessIpAddress The IP address of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface.
accessSubnet The network address of the access subnet in CIDR notation
accessGateway The access subnet default gateway
newVersion The version of packet core to use. Only set this field when instructed to by your support engineer.

Uso de la plantilla

PowerShell

New-AzResourceGroup -Name <resource-group-name> -Location <resource-group-location> #use this command when you need to create a new resource group for your deployment
New-AzResourceGroupDeployment -ResourceGroupName <resource-group-name> -TemplateUri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-update-packet-core-control-plane/azuredeploy.json
Instalar y configurar PowerShell de Azure

Línea de comandos

az group create --name <resource-group-name> --location <resource-group-location> #use this command when you need to create a new resource group for your deployment
az group deployment create --resource-group <my-resource-group> --template-uri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-update-packet-core-control-plane/azuredeploy.json
Instalación y configuración de la interfaz de línea de comandos multiplataforma de Azure