Configure one or more Always On availability group listeners

Applies to: SQL Server on Azure VM

This document shows you how to use PowerShell to do one of the following tasks:

• create a load balancer
• add IP addresses to an existing load balancer for SQL Server availability groups.

An availability group listener is a virtual network name that clients connect to for database access. On Azure Virtual Machines in a single subnet, a load balancer holds the IP address for the listener. The load balancer routes traffic to the instance of SQL Server that is listening on the probe port. Usually, an availability group uses an internal load balancer. An Azure internal load balancer can host one or many IP addresses. Each IP address uses a specific probe port.

The ability to assign multiple IP addresses to an internal load balancer is new to Azure and is only available in the Resource Manager model. To complete this task, you need to have a SQL Server availability group deployed on Azure Virtual Machines in the Resource Manager model. Both SQL Server virtual machines must belong to the same availability set. You can use the Microsoft template to automatically create the availability group in Azure Resource Manager. This template automatically creates the availability group, including the internal load balancer for you. If you prefer, you can manually configure an Always On availability group.

To complete the steps in this article, your availability groups need to be already configured.

Related topics include:

• Configure Always On Availability Groups in Azure VM (GUI)
• Configure a VNet-to-VNet connection by using Azure Resource Manager and PowerShell

Start your PowerShell session

Run the Connect-Az Account cmdlet and you will be presented with a sign-in screen to enter your credentials. Use the same credentials that you use to sign in to the Azure portal.

Connect-AzAccount

If you have multiple subscriptions use the Set-AzContext cmdlet to select which subscription your PowerShell session should use. To see what subscription the current PowerShell session is using, run Get-AzContext. To see all your subscriptions, run Get-AzSubscription.

Set-AzContext -SubscriptionId '4cac86b0-1e56-bbbb-aaaa-000000000000'

Verify PowerShell version

The examples in this article are tested using Azure PowerShell module version 5.4.1.

Verify that your PowerShell module is 5.4.1 or later.

See Install the Azure PowerShell module.

Configure the Windows Firewall

Configure the Windows Firewall to allow SQL Server access. The firewall rules allow TCP connections to the ports use by the SQL Server instance, and the listener probe. For detailed instructions, see Configure a Windows Firewall for Database Engine Access. Create an inbound rule for the SQL Server port and for the probe port.

If you are restricting access with an Azure Network Security Group, ensure that the allow rules include the backend SQL Server VM IP addresses, and the load balancer floating IP addresses for the AG listener and the cluster core IP address, if applicable.

Determine the load balancer SKU required

Azure load balancer is available in two SKUs: Basic & Standard. The standard load balancer is recommended as the Basic SKU is scheduled to be retired on September 30, 2025. The standard load balancer is required for virtual machines in an availability zone. Standard load balancer requires that all VM IP addresses use standard IP addresses.

The current Microsoft template for an availability group uses a basic load balancer with basic IP addresses.

The examples in this article specify a standard load balancer. In the examples, the script includes -sku Standard.

$ILB= New-AzLoadBalancer -Location $Location -Name $ILBName -ResourceGroupName $ResourceGroupName -FrontendIpConfiguration $FEConfig -BackendAddressPool $BEConfig -LoadBalancingRule $ILBRule -Probe $SQLHealthProbe -sku Standard

To create a basic load balancer, remove -sku Standard from the line that creates the load balancer. For example:

$ILB= New-AzLoadBalancer -Location $Location -Name $ILBName -ResourceGroupName $ResourceGroupName -FrontendIpConfiguration $FEConfig -BackendAddressPool $BEConfig -LoadBalancingRule $ILBRule -Probe $SQLHealthProbe

Example Script: Create an internal load balancer with PowerShell

The following PowerShell script creates an internal load balancer, configures the load-balancing rules, and sets an IP address for the load balancer. To run the script, open Windows PowerShell ISE, and then paste the script in the Script pane. Use Connect-AzAccount to log in to PowerShell. If you have multiple Azure subscriptions, use Select-AzSubscription to set the subscription.

# Connect-AzAccount
# Select-AzSubscription -SubscriptionId <xxxxxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx>

$ResourceGroupName = "<Resource Group Name>" # Resource group name
$VNetName = "<Virtual Network Name>"         # Virtual network name
$SubnetName = "<Subnet Name>"                # Subnet name
$ILBName = "<Load Balancer Name>"            # ILB name
$Location = "<Azure Region>"                 # Azure location
$VMNames = "<VM1>","<VM2>"                   # Virtual machine names

$ILBIP = "<n.n.n.n>"                         # IP address
[int]$ListenerPort = "<nnnn>"                # AG listener port
[int]$ProbePort = "<nnnn>"                   # Probe port

$LBProbeName ="ILBPROBE_$ListenerPort"       # The Load balancer Probe Object Name              
$LBConfigRuleName = "ILBCR_$ListenerPort"    # The Load Balancer Rule Object Name

$FrontEndConfigurationName = "FE_SQLAGILB_1" # Object name for the front-end configuration 
$BackEndConfigurationName ="BE_SQLAGILB_1"   # Object name for the back-end configuration

$VNet = Get-AzVirtualNetwork -Name $VNetName -ResourceGroupName $ResourceGroupName 

$Subnet = Get-AzVirtualNetworkSubnetConfig -VirtualNetwork $VNet -Name $SubnetName 

$FEConfig = New-AzLoadBalancerFrontendIpConfig -Name $FrontEndConfigurationName -PrivateIpAddress $ILBIP -SubnetId $Subnet.id

$BEConfig = New-AzLoadBalancerBackendAddressPoolConfig -Name $BackEndConfigurationName 

$SQLHealthProbe = New-AzLoadBalancerProbeConfig -Name $LBProbeName -Protocol tcp -Port $ProbePort -IntervalInSeconds 15 -ProbeCount 2

$ILBRule = New-AzLoadBalancerRuleConfig -Name $LBConfigRuleName -FrontendIpConfiguration $FEConfig -BackendAddressPool $BEConfig -Probe $SQLHealthProbe -Protocol tcp -FrontendPort $ListenerPort -BackendPort $ListenerPort -LoadDistribution Default -EnableFloatingIP 

$ILB= New-AzLoadBalancer -Location $Location -Name $ILBName -ResourceGroupName $ResourceGroupName -FrontendIpConfiguration $FEConfig -BackendAddressPool $BEConfig -LoadBalancingRule $ILBRule -Probe $SQLHealthProbe 

$bepool = Get-AzLoadBalancerBackendAddressPoolConfig -Name $BackEndConfigurationName -LoadBalancer $ILB 

foreach($VMName in $VMNames)
    {
        $VM = Get-AzVM -ResourceGroupName $ResourceGroupName -Name $VMName 
        $NICName = ($vm.NetworkProfile.NetworkInterfaces.Id.split('/') | select -last 1)
        $NIC = Get-AzNetworkInterface -name $NICName -ResourceGroupName $ResourceGroupName
        $NIC.IpConfigurations[0].LoadBalancerBackendAddressPools = $BEPool
        Set-AzNetworkInterface -NetworkInterface $NIC
        start-AzVM -ResourceGroupName $ResourceGroupName -Name $VM.Name 
    }

Example script: Add an IP address to an existing load balancer with PowerShell

To use more than one availability group, add an additional IP address to the load balancer. Each IP address requires its own load-balancing rule, probe port, and front port. Add only the primary IP address of the VM to the back-end pool of the load balancer as the secondary VM IP address does not support floating IP.

The front-end port is the port that applications use to connect to the SQL Server instance. IP addresses for different availability groups can use the same front-end port.

• For information about load balancer limits, see Private front end IP per load balancer under Networking Limits - Azure Resource Manager.
• For information about availability group limits, see Restrictions (Availability Groups).

The following script adds a new IP address to an existing load balancer. The ILB uses the listener port for the load-balancing front-end port. This port can be the port that SQL Server is listening on. For default instances of SQL Server, the port is 1433. The load-balancing rule for an availability group requires a floating IP (direct server return) so the back-end port is the same as the front-end port. Update the variables for your environment.

# Connect-AzAccount
# Select-AzSubscription -SubscriptionId <xxxxxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx>

$ResourceGroupName = "<ResourceGroup>"          # Resource group name
$VNetName = "<VirtualNetwork>"                  # Virtual network name
$SubnetName = "<Subnet>"                        # Subnet name
$ILBName = "<ILBName>"                          # ILB name                      

$ILBIP = "<n.n.n.n>"                            # IP address
[int]$ListenerPort = "<nnnn>"                   # AG listener port
[int]$ProbePort = "<nnnnn>"                     # Probe port 

$ILB = Get-AzLoadBalancer -Name $ILBName -ResourceGroupName $ResourceGroupName 

$count = $ILB.FrontendIpConfigurations.Count+1
$FrontEndConfigurationName ="FE_SQLAGILB_$count"  

$LBProbeName = "ILBPROBE_$count"
$LBConfigrulename = "ILBCR_$count"

$VNet = Get-AzVirtualNetwork -Name $VNetName -ResourceGroupName $ResourceGroupName 
$Subnet = Get-AzVirtualNetworkSubnetConfig -VirtualNetwork $VNet -Name $SubnetName

$ILB | Add-AzLoadBalancerFrontendIpConfig -Name $FrontEndConfigurationName -PrivateIpAddress $ILBIP -SubnetId $Subnet.Id 

$ILB | Add-AzLoadBalancerProbeConfig -Name $LBProbeName  -Protocol Tcp -Port $Probeport -ProbeCount 2 -IntervalInSeconds 15  | Set-AzLoadBalancer 

$ILB = Get-AzLoadBalancer -Name $ILBname -ResourceGroupName $ResourceGroupName

$FEConfig = get-AzLoadBalancerFrontendIpConfig -Name $FrontEndConfigurationName -LoadBalancer $ILB

$SQLHealthProbe  = Get-AzLoadBalancerProbeConfig -Name $LBProbeName -LoadBalancer $ILB

$BEConfig = Get-AzLoadBalancerBackendAddressPoolConfig -Name $ILB.BackendAddressPools[0].Name -LoadBalancer $ILB 

$ILB | Add-AzLoadBalancerRuleConfig -Name $LBConfigRuleName -FrontendIpConfiguration $FEConfig  -BackendAddressPool $BEConfig -Probe $SQLHealthProbe -Protocol tcp -FrontendPort  $ListenerPort -BackendPort $ListenerPort -LoadDistribution Default -EnableFloatingIP | Set-AzLoadBalancer   

Configure the listener

The availability group listener is an IP address and network name that the SQL Server availability group listens on. To create the availability group listener:

1. Get the name of the cluster network resource:

   a. Use RDP to connect to the Azure virtual machine that hosts the primary replica.

   b. Open Failover Cluster Manager.

   c. Select the Networks node, and note the cluster network name. Use this name in the $ClusterNetworkName variable in the PowerShell script. In the following image, the cluster network name is Cluster Network 1:

   

2. Add the client access point. The client access point is the network name that applications use to connect to the databases in an availability group.

   a. In Failover Cluster Manager, expand the cluster name, and then select Roles.

   b. On the Roles pane, right-click the availability group name, and then select Add Resource > Client Access Point.

   

   c. In the Name box, create a name for this new listener. The name for the new listener is the network name that applications use to connect to databases in the SQL Server availability group.

   d. To finish creating the listener, select Next twice, and then select Finish. Don't bring the listener or resource online at this point.

3. Take the cluster role for the availability group offline. In Failover Cluster Manager, under Roles, right-click the role, and then select Stop Role.

4. Configure the IP resource for the availability group:

   a. Select the Resources tab, and then expand the client access point that you created. The client access point is offline.

   

   b. Right-click the IP resource, and then select Properties. Note the name of the IP address, and use it in the $IPResourceName variable in the PowerShell script.

   c. Under IP Address, select Static IP Address. Set the IP address as the same address that you used when you set the load balancer address on the Azure portal.

   

5. Make the SQL Server availability group dependent on the client access point:

   a. In Failover Cluster Manager, select Roles, and then select your availability group.

   b. On the Resources tab, under Other Resources, right-click the availability group resource, and then select Properties.

   c. On the Dependencies tab, add the name of the client access point (the listener).

   

   d. Select OK.

6. Make the client access point dependent on the IP address:

   a. In Failover Cluster Manager, select Roles, and then select your availability group.

   b. On the Resources tab, right-click the client access point under Server Name, and then select Properties.

   

   c. Select the Dependencies tab. Verify that the IP address is a dependency. If it isn't, set a dependency on the IP address. If multiple resources are listed, verify that the IP addresses have OR, not AND, dependencies. Then select OK.

   

   Tip

   You can validate that the dependencies are correctly configured. In Failover Cluster Manager, go to Roles, right-click the availability group, select More Actions, and then select Show Dependency Report. When the dependencies are correctly configured, the availability group is dependent on the network name, and the network name is dependent on the IP address.

7. Set the cluster parameters in PowerShell:

   a. Copy the following PowerShell script to one of your SQL Server instances. Update the variables for your environment.

   • $ClusterNetworkName find the name in the Failover Cluster Manager by selecting Networks, right-click the network and select Properties. The $ClusterNetworkName is under Name on the General tab.

   • $IPResourceName is the name given to the IP Address resource in the Failover Cluster Manager. This is found in the Failover Cluster Manager by selecting Roles, select the SQL Server AG or FCI name, select the Resources tab under Server Name, right-click the IP address resource and select Properties. The correct value is under Name on the General tab.

   • $ListenerILBIP is the IP address that you created on the Azure load balancer for the availability group listener. Find the $ListenerILBIP in the Failover Cluster Manager on the same properties page as the SQL Server AG/FCI Listener Resource Name.

   • $ListenerProbePort is the port that you configured on the Azure load balancer for the availability group listener, such as 59999. Any unused TCP port is valid.

   $ClusterNetworkName = "<MyClusterNetworkName>" # The cluster network name. Use Get-ClusterNetwork on Windows Server 2012 or later to find the name.
   $IPResourceName = "<IPResourceName>" # The IP address resource name.
   $ListenerILBIP = "<n.n.n.n>" # The IP address of the internal load balancer. This is the static IP address for the load balancer that you configured in the Azure portal.
   [int]$ListenerProbePort = <nnnnn>
   
   Import-Module FailoverClusters
   
   Get-ClusterResource $IPResourceName | Set-ClusterParameter -Multiple @{"Address"="$ListenerILBIP";"ProbePort"=$ListenerProbePort;"SubnetMask"="255.255.255.255";"Network"="$ClusterNetworkName";"EnableDhcp"=0}
   

   b. Set the cluster parameters by running the PowerShell script on one of the cluster nodes.

   Note

   If your SQL Server instances are in separate regions, you need to run the PowerShell script twice. The first time, use the $ListenerILBIP and $ListenerProbePort values from the first region. The second time, use the $ListenerILBIP and $ListenerProbePort values from the second region. The cluster network name and the cluster IP resource name are also different for each region.

8. Bring the cluster role for the availability group online. In Failover Cluster Manager, under Roles, right-click the role, and then select Start Role.

If necessary, repeat the preceding steps to set the cluster parameters for the IP address of the Windows Server failover cluster:

1. Get the IP address name of the Windows Server failover cluster. In Failover Cluster Manager, under Cluster Core Resources, locate Server Name.

2. Right-click IP Address, and then select Properties.

3. Copy the name of the IP address from Name. It might be Cluster IP Address.

4. Set the cluster parameters in PowerShell:

   a. Copy the following PowerShell script to one of your SQL Server instances. Update the variables for your environment.

   • $ClusterCoreIP is the IP address that you created on the Azure load balancer for the Windows Server failover cluster's core cluster resource. It's different from the IP address for the availability group listener.

   • $ClusterProbePort is the port that you configured on the Azure load balancer for the Windows Server failover cluster's health probe. It's different from the probe for the availability group listener.

   $ClusterNetworkName = "<MyClusterNetworkName>" # The cluster network name. Use Get-ClusterNetwork on Windows Server 2012 or later to find the name.
   $IPResourceName = "<ClusterIPResourceName>" # The IP address resource name.
   $ClusterCoreIP = "<n.n.n.n>" # The IP address of the cluster IP resource. This is the static IP address for the load balancer that you configured in the Azure portal.
   [int]$ClusterProbePort = <nnnnn> # The probe port from WSFCEndPointprobe in the Azure portal. This port must be different from the probe port for the availability group listener.
   
   Import-Module FailoverClusters
   
   Get-ClusterResource $IPResourceName | Set-ClusterParameter -Multiple @{"Address"="$ClusterCoreIP";"ProbePort"=$ClusterProbePort;"SubnetMask"="255.255.255.255";"Network"="$ClusterNetworkName";"EnableDhcp"=0}
   

   b. Set the cluster parameters by running the PowerShell script on one of the cluster nodes.

If any SQL resource is configured to use a port between 49152 and 65536 (the default dynamic port range for TCP/IP), add an exclusion for each port. Such resources might include:

• SQL Server database engine
• Always On availability group listener
• Health probe for the failover cluster instance
• Database mirroring endpoint
• Cluster core IP resource

Adding an exclusion will prevent other system processes from being dynamically assigned to the same port. For this scenario, configure the following exclusions on all cluster nodes:

• netsh int ipv4 add excludedportrange tcp startport=58888 numberofports=1 store=persistent
• netsh int ipv4 add excludedportrange tcp startport=59999 numberofports=1 store=persistent

It's important to configure the port exclusion when the port is not in use. Otherwise, the command will fail with a message like "The process cannot access the file because it is being used by another process." To confirm that the exclusions are configured correctly, use the following command: netsh int ipv4 show excludedportrange tcp.

Set the listener port in SQL Server Management Studio

1. Launch SQL Server Management Studio and connect to the primary replica.

2. Navigate to Always On High Availability > Availability Groups > Availability Group Listeners.

3. You should now see the listener name that you created in Failover Cluster Manager. Right-click the listener name and select Properties.

4. In the Port box, specify the port number for the availability group listener by using the $EndpointPort you used earlier (1433 was the default), then select OK.

Test the connection to the listener

To test the connection:

1. Use Remote Desktop Protocol (RDP) to connect to a SQL Server that is in the same virtual network, but does not own the replica. It might be the other SQL Server in the cluster.

2. Use sqlcmd utility to test the connection. For example, the following script establishes a sqlcmd connection to the primary replica through the listener with Windows authentication:

   sqlcmd -S <listenerName> -E
   

   If the listener is using a port other than the default port (1433), specify the port in the connection string. For example, the following sqlcmd command connects to a listener at port 1435:

   sqlcmd -S <listenerName>,1435 -E
   

The SQLCMD connection automatically connects to whichever instance of SQL Server hosts the primary replica.

If you're on the secondary replica VM, and you're unable to connect to the listener, it's possible the probe port was not configured correctly.

You can use the following script to validate the probe port is correctly configured for the availability group:

Clear-Host
Get-ClusterResource `
| Where-Object {$_.ResourceType.Name -like "IP Address"} `
| Get-ClusterParameter `
| Where-Object {($_.Name -like "Network") -or ($_.Name -like "Address") -or ($_.Name -like "ProbePort") -or ($_.Name -like "SubnetMask")}

Guidelines and limitations

Note the following guidelines on availability group listener in Azure using internal load balancer:

• With an internal load balancer, you only access the listener from within the same virtual network.

• If you're restricting access with an Azure Network Security Group, ensure that the allow rules include:

  • The backend SQL Server VM IP addresses
  • The load balancer floating IP addresses for the AG listener
  • The cluster core IP address, if applicable.

• Create a service endpoint when using a standard load balancer with Azure Storage for the cloud witness. For more information, see Grant access from a virtual network.

PowerShell cmdlets

Use the following PowerShell cmdlets to create an internal load balancer for Azure Virtual Machines.

• New-AzLoadBalancer creates a load balancer.
• New-AzLoadBalancerFrontendIpConfig creates a front-end IP configuration for a load balancer.
• New-AzLoadBalancerRuleConfig creates a rule configuration for a load balancer.
• New-AzLoadBalancerBackendAddressPoolConfig creates a backend address pool configuration for a load balancer.
• New-AzLoadBalancerProbeConfig creates a probe configuration for a load balancer.
• Remove-AzLoadBalancer removes a load balancer from an Azure resource group.

Next steps

To learn more, see:

• Windows Server Failover Cluster with SQL Server on Azure VMs
• Always On availability groups with SQL Server on Azure VMs
• Always On availability groups overview
• HADR settings for SQL Server on Azure VMs