This template allows you to update the version of an existing packet core.
This Azure Resource Manager template was created by a member of the community and not by Microsoft. Each Resource Manager template is licensed to you under a licence agreement by its owner, not Microsoft. Microsoft is not responsible for Resource Manager templates provided and licensed by community members and does not screen for security, compatibility, or performance. Community Resource Manager templates are not supported under any Microsoft support programme or service, and are made available AS IS without warranty of any kind.
Parameters
| Parameter Name | Description |
|---|---|
| location | Region where the mobile network will be deployed (must match the resource group region) |
| existingSiteName | The name of the existing packet core / site. |
| existingPacketCorePlatformType | The name of the existing packet core platform type. |
| existingMobileNetworkName | The name of the mobile network. |
| existingPacketCoreNetworkTechnology | The mode in which the packet core instance will run. |
| existingPacketCoreCustomLocationId | The resource ID of the customLocation representing the ASE device where the packet core will be deployed. If this parameter is not specified then the 5G core will be created but will not be deployed to an ASE. [Collect custom location information](https://docs.microsoft.com/en-gb/azure/private-5g-core/collect-required-information-for-a-site#collect-custom-location-information) explains which value to specify here. |
| controlPlaneAccessInterfaceName | The name of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface. This should match one of the interfaces configured on your Azure Stack Edge machine. |
| controlPlaneAccessIpAddress | The IP address of the control plane interface on the access network. In 5G networks this is called the N2 interface whereas in 4G networks this is called the S1-MME interface. |
| accessSubnet | The network address of the access subnet in CIDR notation |
| accessGateway | The access subnet default gateway |
| newVersion | The version of packet core to use. Only set this field when instructed to by your support engineer. |
Use the template
PowerShell
New-AzResourceGroup -Name <resource-group-name> -Location <resource-group-location> #use this command when you need to create a new resource group for your deploymentInstall and configure Azure PowerShell
New-AzResourceGroupDeployment -ResourceGroupName <resource-group-name> -TemplateUri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-update-packet-core-control-plane/azuredeploy.json
Command line
az group create --name <resource-group-name> --location <resource-group-location> #use this command when you need to create a new resource group for your deploymentInstall and Configure the Azure Cross-Platform Command-Line Interface
az group deployment create --resource-group <my-resource-group> --template-uri https://raw.githubusercontent.com/Azure/azure-quickstart-templates/master/quickstarts/microsoft.mobilenetwork/mobilenetwork-update-packet-core-control-plane/azuredeploy.json